Site icon Venture jolt

How To Change A Schlage Lock’s 4 Digit Code BE365? Can we add One More Code in it?

how to change the 4 digit code on a schlage lock be365

how to change the 4 digit code on a schlage lock be365

Lock Schlage Keypad: You want to alter the 4-digit code on your Schlage BE365 Lock, but you’re unsure how. Then this article is the best resource for you. In the following paragraphs, I will demonstrate how to modify the 4-digit code on your Schlage BE365, add additional user codes, and alter the Programming Code.

But first, what is the purpose of the 4-digit code on your Schlage BE365? As you presumably already know, the 4-digit User Code that comes with your Schlage Lock may be used to open the lock. You may locate the default codes on a sticker on the back of the keypad assembly and the front of the User Manual.

You will need to change/delete these codes and enter your unique ones to guarantee security. Having stated that, let’s proceed to the instructions.

Changing The 4-Digit Code On A Schlage BE365 Lock

You must remove it and then insert a new code to modify this code. This is how to accomplish it:

Note that there are two 4-digit User Codes, so be careful to erase both codes. To erase each of the 4-digit preset codes, repeat the above procedures. Now that the default User Codes have been erased, you can replace them with new User Codes. Learn how to do it in the next paragraph.

Lock Schlage Keypad

How To Add One More Four-Digit Code (User Code)

Suppose you observe a green light followed by a single lengthy beep. In that case, this indicates that the new User Code has been inserted successfully, essentially replacing the default 4-digit Code that you erased.

This four-digit number is your User Code, which may be used to open the door. The same procedure may add additional User Codes; the lock can hold up to 19 User Codes.

Changing the default 4-digit code on your Schlage BE365 lock is now complete. Let’s examine other Schlage BE365 programming adjustments you may wish to make.

Changing The Code For Preset Programming

Similar to the 4-digit User Code, the Schlage BE365 has a 6-digit Programming Code needed to enter Programming Mode.

This code is necessary when adding or removing User Codes, activating or deactivating Vacation Mode, etc. To guarantee that only you can make modifications to your lock, you must modify the default Programming Code.

The Preset Programming Code is also located on a sticker on the back of the keypad assembly and in the User’s Guide.

Changing the Preset Programming Code on your Schlage BE365 Keypad Lock is as follows:

Note: If you have already modified the Programming Code, you can repeat the processes outlined above if you so want. However, remember and utilize your present Programming Code throughout the procedure.

Other Schlage BE356 include Vacation Mode, which disables all User Codes and prevents unwanted access when you are away from home. This feature is often deactivated by default, so let’s examine how to enable or disable it.

How to change the code on the Schlage keypad door lock be365?


How to Permanently Remove All Programming from a Schlage Door Lock?

Here’s what you should do:

The best way to set a new code on a Schlage door lock

If you’re looking for something more secure than a standard deadbolt, consider a Schlage electronic lock instead. These locks allow keyholders access but also feature a keypad for more convenient use. Those who know the unlock code can enter it on the keypad to gain entry. Nonetheless, you can program a code into the lock to grant entry to a maid or landlord, for example.

Activating/Deactivating Vacation Mode On The Schlage BE365

How to activate Vacation Mode:

To turn off vacation mode, input your Programming Code.

Must check:

Closing Thoughts

As with other Schlage keypad lock models, the BE365 comes with two unique, 4-digit User Codes that you’ll likely want to update.

Changing the default codes for security purposes is a given. Note, however, that this procedure requires you to erase the numbers and then add new ones; there is no direct way to replace an existing 4-digit code.

Stay tuned with us on for more further details.

Exit mobile version